What components do I need to build Dual-Axis Joystick Module?

You'll need 4 components: Arduino UNO, Dual-Axis Joystick Module, Jumper Wires (Male-to-Female) ×5, USB Cable (Type A to B). Each comes in the matching Drishti Innovations robotics kit.

How long does the Dual-Axis Joystick Module project take?

Around 30 minutes from wiring to working build. Difficulty: Easy.

What will I learn from building Dual-Axis Joystick Module?

Be able to interpret analog signals from a potentiometer-based sensor. · Learn how to configure and read a digital input using internal pull-up resistors. · Understand the coordinate system (X and Y axes) used in controllers.

Project 24 · Sensor Catalog (Vol III)

Dual-Axis Joystick Module

Master the mechanics of gaming controllers by building your own 2-axis input system.

Easy 30 min 4 components

Dual-Axis Joystick Module wiring diagram

What you'll learn

Be able to interpret analog signals from a potentiometer-based sensor.
Learn how to configure and read a digital input using internal pull-up resistors.
Understand the coordinate system (X and Y axes) used in controllers.

What's in the kit

Arduino UNO
Dual-Axis Joystick Module
Jumper Wires (Male-to-Female)×5
USB Cable (Type A to B)

Protocol: analog

Related projects

Project 25

Hall vs IR — comparison lab

Discover the battle between magnetism and light by comparing two of the most popular 'non-contact' digital sensors.

Project 36

Addressable RGB LED (WS2812)

Master the art of 'NeoPixels' to control hundreds of colorful LEDs using just a single microcontroller pin!

Project 10

IR Obstacle Sensor Module

Build a smart proximity detector that 'sees' objects using invisible infrared light.